Window Installation in Minneapolis, MN

We handle window installation in Minneapolis, MN for new openings, additions, remodels, and houses where the old windows have to come out frame and all. That covers every level of the house, from main-floor and bedroom windows down to basement and egress units. You get a clear process, a free written quote up front, and windows that are flashed and sealed for our winters.

What Our Window Installation Covers

Here is the work we take on.

• New window openings. Adding a window where there is only wall today: the opening is cut, a header is framed in, and the window is set, flashed, and trimmed inside and out.
• Windows for additions and remodels. Windows installed into new framing on an addition, a porch conversion, or a gutted room.
• Full-frame installation in existing openings. When the old frame is rotted or out of square, the whole unit comes out and a new window is installed to the rough opening.
• Enlarging or resizing an opening. Turning a small window into a larger one, or changing the style, with the framing and siding put back together around it.
• Common window styles. Double-hung, casement, slider, picture, and awning windows.
• Basement egress window installation. We cut the foundation opening, set a code-compliant egress window, install the window well, and grade for drainage.
• Glass block and small basement windows. For laundry rooms and utility spaces where you want light and security. If you are planning block windows finished basement work as part of the same project, we can handle both in one visit.

How Window Installation Works

Here is the actual process, from your first call to a finished window.

1. You tell us about the project

Call or send a note. Tell us whether this is a new opening, an addition, or a full replacement, and roughly how many windows. Photos of the wall inside and outside help.

2. We measure and quote

We come out, measure the openings or the wall where the new window goes, and look at the framing, siding, and interior finish around it. You do not need to know how to measure for a replacement window; we do that on site. You get a free quote in writing, not a vague range.

3. We frame, set, and seal

On install day we cut or clear the opening, frame it, set the window level and square, flash it, and seal it. For basement egress windows we dig and set the window well, anchor it, and backfill with gravel so water drains away from the foundation.

4. We finish and walk you through it

We trim the interior, repair the siding or masonry around the opening, and clean up. Before we leave, you open and close each window yourself. Permits are handled where the job requires them.

What Affects the Price

No two houses price the same, and we will not pretend otherwise. Here is what moves the number.

• New opening vs. existing opening. Cutting and framing a new opening costs more than installing into an opening that is already there.
• Wall type. Wood-framed walls, brick or stucco exteriors, and foundation walls each take different work.
• Window size and style. A large picture window or a casement costs more than a standard double-hung.
• How many windows. More windows cost more in total and usually less per window.
• Floor and access. Second-story work and tight side yards add time.
• Interior finish. Working in a finished room takes protection and patch-back work that open framing does not.
• Basement and egress work. A foundation cut and a window well add excavation and masonry. If you are weighing galvanized vs vinyl wells, the soil and frost depth around your house should drive that choice.

We do not publish prices because they would be wrong for your house. What we do give you is a free, written quote after we see the job.

Why Minneapolis, MN Chooses Us

We are a local installer, not a national franchise. Minneapolis has a lot of older houses, and older walls are rarely square or standard, so we measure and plan each opening instead of quoting from a script.

When you reach out, you get a person who can explain the process, tell you whether the job needs a permit, and put a real number on paper. If a simpler window does the job, we say so.

Our footprint covers the Twin Cities area, including Saint Louis Park, Golden Valley, Robbinsdale, Crystal, Columbia Heights, Saint Anthony, Roseville, Falcon Heights, Lauderdale, and the Longfellow Community. If you are anywhere in that range and need window installation in Minneapolis, MN or a nearby suburb, we can take a look.

Window Installation Questions, Answered

How much does window installation cost in Minneapolis, MN?

It depends on whether you are cutting a new opening or installing into an existing one, the window style and size, and the wall it goes into. Installing into an existing opening is the low end; a new opening in a masonry or foundation wall is the high end. We give a free written quote after measuring, so you get a real number instead of a guess.

What is the average cost of replacing a window in Minnesota?

Averages do not help much, because the range runs from a small basement unit to a large picture window in a new opening. The honest answer is that your wall type, window size, and site access set the price. Tell us what you have and we will quote your actual job.

Do I need a permit to install a window?

A like-for-like swap often does not need one, but cutting a new opening or enlarging one usually does, because the framing changes. Egress windows in a basement bedroom also have to meet code. We handle permits where the job requires them.

Can windows be installed in winter?

Yes. Windows go in one opening at a time, so the house is open to the cold for a short stretch per window rather than all day.

What kind of window works best for basement egress?

Casement windows are the usual pick. A casement egress window swings fully open, so a compact frame still gives the clear opening code requires.

Which window company in Minnesota offers the best windows?

The install matters more than the brand sticker. A well-made window set out of square or flashed poorly will leak. We size the unit to the opening, set it level, flash it, and seal it.

Get Started

Tell us about the project and we will set a time to measure, answer your questions in plain language, and hand you a free written quote. Request a quote today and get a straight answer on what window installation in Minneapolis, MN will take for your house.

Prefer to talk it through? Call (612) 482-9787 — a quick call is usually the fastest way to get a straight answer for your situation.