Basement Window Replacement in Minneapolis, MN

We replace old, leaky, and frosted basement windows for homeowners across Minneapolis, MN. If you searched for basement window replacement minneapolis mn, this is the work we do: pull the failing unit, set a new frame without tearing up your foundation wall, and leave you with a clear, operable window that meets code. You get a straight answer on scope and a free quote before any work starts. We are a local installer, and basement windows are the whole job, not a side line.

What Our Basement Window Replacement Covers

Most Minneapolis basements have windows from the original build. Steel frames rust, wood frames rot, and single-pane glass frosts over every winter. Here is what we handle:

• Replacement basement windows for old steel or wood frames. We remove the rusted or rotted unit and set a new insulated window in the existing opening.
• Basement window replacement inserts. When the existing frame is sound, a basement window insert replacement fits inside it. Less demolition, faster install, no wall damage.
• Basement hopper windows. The most common style in Minneapolis basements. They tilt inward for ventilation and seal tight against winter drafts.
• Casement basement windows. Casement windows crank fully open, which makes them the standard choice when a bedroom egress requirement is in play.
• Glass block windows. Where you want light and security but no ventilation, block windows are a solid, low-maintenance option, often used near grade or in laundry areas.
• Upgrades tied to a finished basement. If you are finishing the space or adding a bedroom, we can tell you whether your current openings meet code or whether you need a full egress window and window well instead.

If your project turns out to need a larger opening cut for egress, we do that too. That work falls under our basement egress window installation service, and we will tell you up front if that is what code requires.

How Basement Window Replacement Works

1. Measure and assess

We look at each window opening, the frame condition, and the grade outside. We check basement window sizes against what is available and flag anything that affects code compliance, like a bedroom that needs an egress window rather than a same-size swap.

2. You get a real quote

You receive a written quote for the actual work: window units, style (hopper, casement, or glass block), and any window well repair needed. The quote is free, and there is no vague "starting at" number that doubles later.

3. Removal and prep

On install day we pull the old unit and frame. We do this without extensive wall damage; the goal is a clean opening, not a demolition project. We clear rust, rot, and old fasteners, then check the sill and buck for anything that needs repair before the new frame goes in.

4. Set, seal, and finish

We set the new frame square and level, fasten it, insulate the gaps, and seal inside and out. Minneapolis winters find every gap, so the sealing step gets real attention. We finish the interior trim, test the operation, and walk you through the window before we leave.

What Affects Basement Window Replacement Pricing

Basement window replacement cost varies by project, and anyone who quotes you a number before seeing the openings is guessing. The honest factors:

• How many windows. Multiple windows in one visit cost less per unit than one-off swaps.
• Frame condition. If the existing frame is sound, an insert install is simpler. Rotted bucks or crumbling sills need repair first.
• Window style. Hopper, casement, and glass block units price differently, and sizes outside the common range cost more.
• Opening changes. A same-size replacement is straightforward. Enlarging an opening for an egress window is a different scope, and we quote it separately.
• Access and window wells. Windows below grade may need window well installation or repair, and tight exterior access adds labor.

The way to know your number is to have us look at the actual windows. For a basement window replacement in Minneapolis, MN, the quote is free and specific to your house.

Why Minneapolis, MN Chooses Us

Plenty of local sites list a phone number and nothing else. Plenty of big regional outfits treat every basement like the last one. We sit in between on purpose: a local installer who is reachable, specific about the work, and easy to get a straight answer from. When you call about basement window replacement in Minneapolis, MN, you talk to someone who knows what a 1950s block foundation looks like and how frost depth affects a window well.

Basement windows are code-driven, practical work. We are not a design showcase, and we will not upsell you into a renovation. If a same-size hopper replacement solves your problem, that is what we will quote. If code requires an egress window because the room is a bedroom, we will say so plainly and explain why.

We also do the related work most window companies skip: window well installation, galvanized wells, glass block, and small basement window installation. One contractor, one quote, one crew that has seen your situation before.

Basement Window Replacement Questions, Answered

How do I know my basement windows need replacement?

Frost or condensation between panes, rusted steel frames, windows painted shut, and cold drafts in winter are the main signs. If water leaks in during spring melt, the frame seal has usually failed. Any of these means the window is costing you heat and letting in moisture.

Can you replace a basement window without damaging the wall?

Yes, in most cases. A basement window insert replacement fits inside the existing frame, and even full-frame swaps in a same-size opening do not require cutting the foundation. Wall work only comes into play when you enlarge an opening for egress.

What styles work for basement windows?

Hopper windows are the most common in Minneapolis basements because they seal tight and vent well. Casement windows open fully and are the usual pick when egress code applies. Glass block works where you want light and security without ventilation.

Do replacement basement windows have to meet egress code?

Only if the room is a sleeping room or code otherwise requires an exit. A same-size replacement in a laundry or utility area does not trigger the bedroom egress requirement. If you are finishing the basement or adding a bedroom, we will check your openings against code before quoting.

What size are basement windows?

Most Minneapolis basement openings fall in a common range of standard basement window sizes, but older homes vary. We measure each opening rather than assume, because a window that is even slightly off will not seal right. Odd sizes can be ordered; they cost more and take longer to arrive.

How long does the install take?

A same-size replacement typically takes a few hours per window once the units are on hand. Multiple windows usually finish in a day. Ordering the windows is the longest part of the timeline, and we give you that lead time in the quote.

Get Started

If your basement windows are frosted, drafty, or rusted out, request a free quote and tell us what you are seeing. We will look at the openings, tell you whether a replacement or an egress upgrade fits your situation, and put a real number in writing. We handle basement window replacement in Minneapolis and nearby communities including Saint Louis Park, Golden Valley, Roseville, Columbia Heights, Crystal, Robbinsdale, Saint Anthony, Falcon Heights, Lauderdale, and Longfellow. Call us or send a request, and you will get a plain answer, not a sales pitch.